Toys Alliance MAS-02 Megatron Teaser

I've held off on getting MP Megatron due to it's QC issues and the complicated transformation. If a transformation is too complicated, I usually just pick one form that's best and stick with that. And with Megatron? Frankly, it's the robot mode you want to stick with rather than the pistol. And if I'm going to pay a ton of mortal 'smackers' for a high-end Megatron figure that I'm just going to leave in robot mode, then I'd rather save up and get one that's specifically designed to look awesome in robot mode.

Therefore I eagerly anticipate the unleashment of MAS Megatron.

DeathReviews wrote:I've held off on getting MP Megatron due to it's QC issues and the complicated transformation. If a transformation is too complicated, I usually just pick one form that's best and stick with that. And with Megatron? Frankly, it's the robot mode you want to stick with rather than the pistol. And if I'm going to pay a ton of mortal 'smackers' for a high-end Megatron figure that I'm just going to leave in robot mode, then I'd rather save up and get one that's specifically designed to look awesome in robot mode.

Therefore I eagerly anticipate the unleashment of MAS Megatron.

That was my thought as well, but... he's probably going to be double the size of MP10 Optimus Prime, so... for my purposes, that'd look pretty strange.

Know what? Those are the most detailed and expensive... ACTION MASTERS ever! Just imagine the vehicles that would go with them!

Prototypes of Toys Alliance's Mega Action Series Megatron and Fall of Cybertron Optimus Prime, as well as a sample of Nemesis Prime, were shown off at ACGHK 2017 in Hong Kong! Thanks to ToysTV HK and Robotkingdom, we have some images of all three. This is our first proper look at Megatron, who is set for release in the fall. Check out the images below, and let us know what you think in the Energon Pub!

Ive never seen so many super expensive non transforming statue-bots as I have seen in the last 6 months. From Unicron lamps, to obscure characters like Tarn, theyre popping up everywhere. Is there really a market for $500 and up statues in the collector base of transforming robots? Or are these artists just trying to start a new trend and hoping fans buy into it? Is there something Im not seeing in these statues that the MP line doesnt already have plus more?

Well, that's it. I really want that MAS Megatron if I can get it

I can't speak for the Soundwave statue vs. MP Soundwave. But the MP Megatron transformation is, IMO, prohibitively complicated to the point where I'd likely leave it in robot mode anyway. And if I'm going to leave it in robot mode, then I may as well get this really, really awesome one....

Yeah I transformed MP Megs ONCE and that was enough. His transformations is like, really really fiddly and I was worried about breaking the guy. He just ain't fun to transform so hes perma-bot on display now. Never have any problems with Soundwave, but watch out on his bird-bots! I had to get new ones from Takara cause I damaged Buzzsaw's leg. I think my fav masterpiece is Ultra Magnus. He's actually fun to transform and I don't worry about breaking anything.

We've seen a coloured teaser for the Hasbro licensed Toys Alliance MAS-02 Megatron figure back here - and we now also have a nice long look at the prototype courtesy of Hong Kong based ToysTV on Facebook! The video embedded below shows off the non-transforming figure, its posability, and accessories - check it out, and let us know what you think in the Energon Pub!

The Toys Alliance Facebook has posted some new images regarding the Megatron figure they got coming along and even some product details:

MAS-02 Megatron
Product Features
- Figure stands approximately 18-Inches (48 cm) tall
- Fully poseable with over 72 Points of articulation including articulated fingers
- Metallic paint finishing (Partially)
- Accessories includes “Scope”
- LED Light-Up feature on “Scope” and “Eyes”
(6 x 377 SR626SW Batteries require, not included)
- Material Used- ABS, PVC, POM
- Official licensed by Hasbro
Release Date: Dec 2017 (Tentative)

MAS-02. Shut up and take my money!

DeathReviews wrote:MAS-02. Shut up and take my money!

Pretty much, yeah. I about cried with elation when I saw it.

Why would anyone want this non transforming statue bot when they can have MP-36? I dunno about you guys, but I like my Transformers to actually transform. Im not into action figures. I never considered Transformers "action figures" and I definitely dont consider this figure a "Transformer". Id either call it a "Transformers related product" or the worlds largest Action Master.

Man... I have MP-36, and let me tell you... transforming him is NOT FUN dude. I was worried about breakage the entire time and it's simply an unpleasant transformation. I love the guy but he's staying in robo mode permanently as I ain't breaking a $200 toy. No way, no how. I have MP-10 so I was gonna get him no matter what, but for someone that just wants a G1 style Megatron and doesn't care about transforming him the MAS-02 kind of makes sense.

Yep, what he said. While MP Megatron is awesome, my thought process is that if he's too complicated to transform, and I wind up leaving him in robot mode anyway, why not get MAS02, who was designed specifically to be awesome in robot mode...?

thats friggin huge!

Sweet merciful cats that's an awesome looking Megatron!!

Gigantic too!!

I wonder how strong the joints are gonna be. Were the any issues with Optimus?

The MAS-01 is epic and the joints are tight. As far as these figures not actually transforming, they are still great display pieces. You can always pick up the MP figures and pay a bit more for a transformable figure that is also cartoon accurate. I own the MP-05 (huge disappointment) and MP-36, both of which remained in robot mode whenever displayed. At one point I owned Apollyon and he also remained in robot mode. It seems at my age I prefer to set up dioramas with the majority of my Transformers in robot mode. It boils down to personal preference. All I know is this MAS-02 is going to look great displayed next to my MAS-01. PRE-ORDERED! BBTS Can't wait for December/Christmas.

We have a new update from the Toys Alliance Facebook page on their upcoming figure, MAS-02 Megatron. The post clarifies that they are having some delay on this fully licenced figure, and that the new, updated shipping dates should be somewhere within February or March of next year. Accompanying this post are some new stock photos of this figure, which we've mirrored down below. Check out the full quote from the update:

We are expecting some delay on our MAS-02 Megatron shipment due to the production delay by manufacturer, and the updated launch date is late Feb or early Mar, we apologize for the long wait.
Thank you for all your support and Happy Holiday!
TA

Disappointed? Yes. But I'll wait a while longer for a Megatron this awesome....

These pictures cement my happiness in my decision to pre-order this bad boy. This is going to go great with my MAS Optimus. CAN'T WAIT.

Hot off the heels of the release of MAS-02 Megatron mega action figure we are graced with a tease of the next offering from them. The Toys Alliance Facebook page did a preview post of what will probably be MAS-03(?) and it is none other than Decepticon Communications Officer and Spymaster, Soundwave. While they added a question mark after MAS-03 teasing the idea of it, we are going to hedge our bets here on the fact this is next. It is assuredly a fitting choice too in going from Megatron to Soundwave. Here is the tease below that they posted on their page:

I really like this line and the price point is pretty good. I just don't have the space with a mostly Masterpiece collection.

I love Soundwave and they did a great job with the last two, so I can't wait to see the final product!

I love Soundwave and they did a great job with the last two, so I can't wait to see the final product!

Looks like he's wearing extra thick leg warmers.

We had seen a fair while back the tease for the next project in the officially licensed Toys Alliance Mega Action Series Transformers figure line, after Optimus Prime and Megatron, but it looks like we're even closer to getting a proper look at the new product soon: MAS-03 Soundwave has both a poster and a grey prototype now!

Found over on the Tag Hobby website, we get a couple of images showing off the design and the prototype, plus the confirmation that the company will be attending this weekend's Hong Kong Animation-Comic-Game (ACGHK) 2018 so we may actually see the prototype in person there. Check it out below for now, and stay tuned for more!

If I could just have the money sucked out of my bank account and one of these dropped from the sky into my hands as soon as possible that would be great.

Following the tease earlier today, we have new images of the upcoming Toys alliance Mega Action Series 03 Soundwave, via the Hobbymizer Hong Kong Facebook page. The new giant statue of Soundwave is a new slightly stylized take on his G1 self, complete with tape deck, shoulder cannon (stored behind his back in these shots) and hand gun. He also comes with Laserbeak perching on his shoulder in the pictures shown, and another Laserbeak is seen in tape mode, with some panel lines suggesting it either does something, or the panel lines are an homage to the original tape form.

Also cool to see is that Soundwave appears to be able to carry fully sized cassette tapes, as a copy of Awesome Mix Volume 2 (nice Guardians of the Galaxy reference!) can be seen actually sitting in his chest.

Check out some of the images below, and you can go to the Facebook page to see all the shots of the MAS crew!

Do you suppose laserbeak transforms?

TrypticonCarne wrote:Do you suppose laserbeak transforms?

Doubt it, as these are just statues and not meant to Transform.

D-Maximal_Primal wrote:

TrypticonCarne wrote:Do you suppose laserbeak transforms?

Doubt it, as these are just statues and not meant to Transform.

So one of laserbeaks back finds is molded crooked and the hinges are for show

TrypticonCarne wrote:

D-Maximal_Primal wrote:

TrypticonCarne wrote:Do you suppose laserbeak transforms?

Doubt it, as these are just statues and not meant to Transform.

So one of laserbeaks back finds is molded crooked and the hinges are for show

Correction: Mega Action series are fully articulated giant action figures, but not transformable (Hasbro doesn't allow it on licensed figures). So Laserbeak has working articulation, but doesn't turn into a tape. He does appear to have the same type of chest door mechanism that opens by pushing the button on top.

Emerje