New Gallery: Masterpiece MP-11SW Skywarp

No photos of the Chinese instructions?

Deathsanras wrote:No photos of the Chinese instructions?

Transformers Masterpiece Skywarp Gallery


Transformers Masterpiece Skywarp Gallery

beautiful

Va'al wrote:

Deathsanras wrote:No photos of the Chinese instructions?

Transformers Masterpiece Skywarp Gallery

Transformers Masterpiece Skywarp Gallery

Apparently, it turns out that Chinese and Japanese are not actually the same thing.

Am I the only one who is perennially upset that Skywarp, Thundercracker and Starscream all had their tech spec scores switched perpetually into the future all the way back from '84? I know many people don't even look at em, but I always have.

Got this; now I hope I am done forever buying MP Skywarps.

sol magnus wrote:Am I the only one who is perennially upset that Skywarp, Thundercracker and Starscream all had their tech spec scores switched perpetually into the future all the way back from '84? I know many people don't even look at em, but I always have.

yes. its just you.

Randomhero wrote:

sol magnus wrote:Am I the only one who is perennially upset that Skywarp, Thundercracker and Starscream all had their tech spec scores switched perpetually into the future all the way back from '84? I know many people don't even look at em, but I always have.

yes. its just you.

Good to know.

i want this very much. However i have the previous version with the flappy hip kibble and gimpy feet and i can't justify the cost to myself, let alone the wife.

Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

it looks like he is about to push someone down twenty fights of stairs

lets have a contest of all the Sky-warps in existence of who can push someone down a flight of stairs the fastest

Seibertron wrote:Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

Unfortunately, I won't even be ordering this for another two weeks. If no one shows up with one in the time it takes for me to get I'll be glad to help out in any way I can.

Seibertron wrote:Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

I know just the person to ask about this, and have sent him a PM to see if he could give his two cents on the matter.

If he doesn't respond, I know where else to contact him.

Deathsanras wrote:

Va'al wrote:

Deathsanras wrote:No photos of the Chinese instructions?

Transformers Masterpiece Skywarp Gallery

Transformers Masterpiece Skywarp Gallery

Apparently, it turns out that Chinese and Japanese are not actually the same thing.

Wait, did I mix up the photos? Dang. I am so sorry.

Seibertron wrote:Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

I'll check mine tonight.

Counterpunch wrote:

Seibertron wrote:Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

I'll check mine tonight.

Thanks CP!

I highlighted the flaw in the photo below.

Sabrblade wrote:

Seibertron wrote:Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

I know just the person to ask about this, and have sent him a PM to see if he could give his two cents on the matter.

If he doesn't respond, I know where else to contact him.

I got your message.

I have 4, but I've only opened 1. It has the same little bubble there. I would have never noticed it had I not seen this picture. Doesn't bother me. Must be common to all of them.

Randy

Seibertron wrote:

Counterpunch wrote:

Seibertron wrote:Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

I'll check mine tonight.

Thanks CP!

I highlighted the flaw in the photo below.

Present on mine as well.

Powered Convoy wrote:

Sabrblade wrote:

Seibertron wrote:Any of the rest of you have this version of Skywarp? Two of the ones that I got both had the same mold defect on his upper left forehead. There's a small bump in the plastic. I really want to swap heads with a Thundercracker but he's got a shiny painted finish and Skywarp has a plain plastic matte finish. Urgh.

Just want to know if it's a limited run that has this problem or if all MP-11SW Skywarps have this problem.

I know just the person to ask about this, and have sent him a PM to see if he could give his two cents on the matter.

If he doesn't respond, I know where else to contact him.

I got your message.

I have 4, but I've only opened 1. It has the same little bubble there. I would have never noticed it had I not seen this picture. Doesn't bother me. Must be common to all of them.

Randy

Just a question - please don't get upset. Why do you have 4?

I wish the Decepticon symbols were consistent between the three. Same direction, same color, same outline. Oh well.

My two arrive Wednesday or Thursday, so... I'll also confirm. But it seems to be pretty consistent given the responses here.

sol magnus wrote:Just a question - please don't get upset. Why do you have 4?

He sells Transformers products.

i never pose my figures in alt mode (with the exceprion of some beast-formers) but that pic there... makes me smile so much... it makes me wanna do that. damn those jets look nice like that!

Seibertron wrote:

sol magnus wrote:Just a question - please don't get upset. Why do you have 4?

He sells Transformers products.

Ah. At different times I've gotten two of something for display purposes, but that ship sailed when I got into Masterpiece.

sol magnus wrote:

Seibertron wrote:

sol magnus wrote:Just a question - please don't get upset. Why do you have 4?

He sells Transformers products.

Ah. At different times I've gotten two of something for display purposes, but that ship sailed when I got into Masterpiece.

That's usually why I have multiples of anything (because I sell figures). But with Skywarp it's because he's my favorite character. I usually buy 3 or 4 of each of him.

Randy

I can't afford 4 of my favorite character - Ultra Magnus.

Yeah 4 Skywarps was a big punch to my wallet.

Powered Convoy wrote:Yeah 4 Skywarps was a big punch to my wallet.

I may get a TRU Magnus if he's colored more like the G1 toy, but I'd still find it hard to go through with...and I'd be going off plan with my budget for the year. Yeah, I have one of those. I kind of feel like I have to. The price points are exorbitant, but I definitely think in most cases you get what you pay for.

Still, for a favorite character the temptation to buy more than one is there. I almost did it with Prowl, but I resisted successfully.

i am surprised no one noticed what appears to be 5mm mini-con hard point on Magnuses shoulders

I updated Masterpiece MP-21 Bumblebee's gallery with images of the coin and the battle mask in package.

http://www.seibertron.com/transformers- ... ee/3461/1/

Loving my new MP-11SW Skywarp, apart from the stupid wing insignias that are the opposite direction! Damn you Hasbro Asia!!

koolkollectibleskhai wrote:Loving my new MP-11SW Skywarp, apart from the stupid wing insignias that are the opposite direction! Damn you Hasbro Asia!!

I just received mine, Monday! I'm opening him today!

You know what these guys are missing? That's right Takara, their frickin leader!! Why Takara has taken so long and still not announced or released a new MP Megatron is beyond me.

I would have thought with the teasers for the 3rd party Apollyon (ie. no-Megatron) MP scaled figure, that this would have been the kick up the arse Takara needed. But still silence from them!!

I will just have to keep on waiting I guess.....

koolkollectibleskhai wrote:You know what these guys are missing? That's right Takara, their frickin leader!! Why Takara has taken so long and still not announced or released a new MP Megatron is beyond me.

I would have thought with the teasers for the 3rd party Apollyon (ie. no-Megatron) MP scaled figure, that this would have been the kick up the arse Takara needed. But still silence from them!!

I will just have to keep on waiting I guess.....

Let Soundwave lead. He was a better leader in Marvel UK G1 than Megatron ever was.

Sabrblade wrote:

koolkollectibleskhai wrote:You know what these guys are missing? That's right Takara, their frickin leader!! Why Takara has taken so long and still not announced or released a new MP Megatron is beyond me.

I would have thought with the teasers for the 3rd party Apollyon (ie. no-Megatron) MP scaled figure, that this would have been the kick up the arse Takara needed. But still silence from them!!

I will just have to keep on waiting I guess.....

Let Soundwave lead. He was a better leader in Marvel UK G1 than Megatron ever was.

Good thing I didn't read much Marvel UK.

sol magnus wrote:Good thing I didn't read much Marvel UK.

Either way, Megatron was just as poor a leader as he was in Marvel U.S. and the cartoon in Marvel UK.

Sabrblade wrote:

sol magnus wrote:Good thing I didn't read much Marvel UK.

Either way, Megatron was just as poor a leader as he was in Marvel U.S. and the cartoon in Marvel UK.

That's your opinion, which you are entitled to. It has nothing to do with his (and my) desire for an MP-10 scaled Takara Megatron.

sol magnus wrote:

Sabrblade wrote:

sol magnus wrote:Good thing I didn't read much Marvel UK.

Either way, Megatron was just as poor a leader as he was in Marvel U.S. and the cartoon in Marvel UK.

That's your opinion, which you are entitled to. It has nothing to do with his (and my) desire for an MP-10 scaled Takara Megatron.

I just meant let Soundwave lead for now, until a new Megs gets made, as Soundwave's qualified to be the acting-leader in the (hopefully) temporary absence of his true leader.

Sabrblade wrote:

sol magnus wrote:

Sabrblade wrote:

sol magnus wrote:Good thing I didn't read much Marvel UK.

Either way, Megatron was just as poor a leader as he was in Marvel U.S. and the cartoon in Marvel UK.

That's your opinion, which you are entitled to. It has nothing to do with his (and my) desire for an MP-10 scaled Takara Megatron.

I just meant let Soundwave lead for now, until a new Megs gets made, as Soundwave's qualified to be the acting-leader in the (hopefully) temporary absence of his true leader.

To be fair, he's currently leading on my Decepticon shelf at present, so there's that.

sol magnus wrote:

Sabrblade wrote:

sol magnus wrote:

Sabrblade wrote:

sol magnus wrote:Good thing I didn't read much Marvel UK.

Either way, Megatron was just as poor a leader as he was in Marvel U.S. and the cartoon in Marvel UK.

That's your opinion, which you are entitled to. It has nothing to do with his (and my) desire for an MP-10 scaled Takara Megatron.

I just meant let Soundwave lead for now, until a new Megs gets made, as Soundwave's qualified to be the acting-leader in the (hopefully) temporary absence of his true leader.

To be fair, he's currently leading on my Decepticon shelf at present, so there's that.

Cheers.

Here's my current Transformers Masterpiece collection. As a G1 fan who grew up with the cartoon in the 80s, these figures truly are a dream come true. They never cease to put a smile on my face

And Takara just keeps putting out more awesomeness every year! They ended 2014 on a high with Bumblebee and Ultra Magnus, and 2015 is off to a controversial start with MP-23 Exhaust. But with MP-24 Star Saber and MP-25 Tracks on the way, and potentially Ironhide, Ratchet, and a big Decepticon on the way, this line is just going from strength to strength!!

koolkollectibleskhai wrote:...and a big Decepticon on the way....

Whoooozat?

shajaki wrote:

koolkollectibleskhai wrote:...and a big Decepticon on the way....

Whoooozat?

I thought there were rumours going around that it was going to be either Galvatron or Shockwave?

koolkollectibleskhai wrote:

shajaki wrote:

koolkollectibleskhai wrote:...and a big Decepticon on the way....

Whoooozat?

I thought there were rumours going around that it was going to be either Galvatron or Shockwave?

I would gratefully accept either.

sol magnus wrote:

koolkollectibleskhai wrote:

shajaki wrote:

koolkollectibleskhai wrote:...and a big Decepticon on the way....

Whoooozat?

I thought there were rumours going around that it was going to be either Galvatron or Shockwave?

I would gratefully accept either.

Same. But I haven't heard anything about a Shockwave. And sadly, Galvatron has been rumored since MP09

MP Galvatron is as common a rumor as the "Michael Bay will not be directing the next movie!" rumor we've been hearing since after ROTF.

It's been a while since I went through my Transformers Masterpiece collection, and Maz from the TFSource forum inspired me with his term "Masterpiece Moment" to get my collection together.

So here's my video on what my "Masterpiece Moments" are with each of the figure molds. Each one has at least one awesome feature that I love!

Hope you can check it out, subscribe, like, and comment with what your personal "Masterpiece Moments" are!

Just posting up some of the figures I forgot to take photos of with their coins and cards

Awesome haul from Robotkingdom arrived today! Stay tuned for more pics and vid reviews

Seibertron.com is proud to present our newest gallery, Takara Tomy Transformers Masterpiece MP-23 Exhaust! This figure has quite the sorted history, what with legal issues and rumors galore of cancellations. While Hasbro Asia did actually cancel distribution of Exhaust (and sadly his collector coin) it didn't stop Takara from releasing him domestically. Thankfully, he's not impossible to acquire and he's now a part of our vast and growing Seibertron Galleries. He transforms into an officially licensed Lancia Stratos Turbo, and carries one of mold-mate Wheeljack's inventions: The Instant Immobilizer. Look below to see Exhaust and feel free to keep browsing once your done!

Transformers Masterpiece Exhaust

It's too bad the all the legal craziness makes it unlikely Exhaust will ever appear anywhere else anytime soon, he's got a cool head design I'd like to see done on a (cheaper) Generations or Legends figure.