MP-08X King Grimlock Mystery Accessory Confirmed as Throne

Where in the hell do I buy this again? I keep shoving money into my CD drive but nothings happening.

Wish I could just by the throne.

Watch the throne.

Sorry, had to do it.

Pretty awesome. I would really like that, even if I think one made to look like it's made from crushed Decepticons would have been cooler.
Comon single pre-order.

Me Grimlock no bozo, me king!

Fires_Of_Inferno wrote:Where in the hell do I buy this again? I keep shoving money into my CD drive but nothings happening.

buy portable cd drive its cheaper bestbuy is best place, target don't know idf they sell I don't trust walmart electronic department you get what you paid for at walmart.

looks cardboard Styrofoam had baby togeather basic plain looking no detaile to make more stone like

Hmmm...I wonder if it is made of Styrofoam material.

That's kind of a cheesy looking throne. I was hoping for something with more of a presence.

Meh. I could make a 3D model and order it printed from Shapeways and it'd look beter. And if I made it right, it'd likely be cheaper, too.

Huh... not exactly what I was expecting. Still looks cool, but like Nemesis Maximo said, something like this (especially since this is Grimlock we're talking about here) really needs some presence in its appearance.

MenaceRX wrote:Wish I could just by the throne.

I'm fairly certain the throne can be bought separately, and is the reason why TFSource added twenty bucks to MP-08X's price.

valar morghulis

I'll spring $3 for that so called "Throne". I can make a paper-mache throne much better than that sorry looking piece.

>:oP
throne looks kind of cheap and simple,,, Grimlock needs a better throne imo

okay lets all be honest...THIS is the Throne we wanted for Grimlock

Unicronobot wrote:
okay lets all be honest...THIS is the Throne we wanted for Grimlock

You get all my likes sir.

Transformers Asia gives us an official look at the upcoming throne for MP-08X Grimlock. According to the website, this throne comes free with MP-08X at selected Asian retailers. However, Takara Tomy is selling this separate to most retailers which increased the price of the base figure. We also get a nice view of the box the throne comes in.

Is it thin plastic or solid?

And I'm a little confused, are we going to be able to Buy this stand alone, or do we need to get another MP Grimmy?

For $20, this thing better be made of actual marble.

Metro Prime wrote:For $20, this thing better be made of actual marble.

LOL. True story

Shit if its only $20 then its gonna be plastic anything marble is gonna be like easy $ 60 or more

to everyone who wants to get this thing by itself, check ebay and chimung. when the asia reissue came out with that flame attachment and coin/crown thing i was able to buy the pair off ebay for 25 bucks shipped. and later chimung had it listed for a similar price.

if anyones interested, i preordered kingy here on BBTS and just got my email notification that hes arrived! so he should be in stock everywhere soon! im quite excited

Hey all, here's my full review of the new 2nd production run of MP-8X King Grimlock where I compare it against my original MP-8 (I never got the original MP-8X). I also give a close look at the garbage that is the throne and also a look at the elbow assembly issue that had affected mine and a few others.

http://youtu.be/FYsGYNTOUHg

Hope you can check it out, subscribe, like, and comment with your thoughts on the figure too

Youtube reviewer and Seibertron.com member Kool Kollectibles just dropped by to share with everyone a video review of the Takara Masterpiece MP-8X King Grimlock with Throne. This version of Masterpiece Grimlock is a reissue of the MP8X King Grimlock that was originally released in 2009 which has a color scheme base on his appearance in the G1 Marvel Comic.

I think Hasbro's hit an all new low point for this throne.

AutoBorst wrote:I think Hasbro's hit an all new low point for this throne.

This release has nothing to do with Hasbro. It's a Takara release.

mooncake623 wrote:

AutoBorst wrote:I think Hasbro's hit an all new low point for this throne.

This release has nothing to do with Hasbro. It's a Takara release.

Did you watch the video? The throne is a Hasbro piece, and it shows. Just flimsy plastic.

Rodimus Prime wrote:

mooncake623 wrote:

AutoBorst wrote:I think Hasbro's hit an all new low point for this throne.

This release has nothing to do with Hasbro. It's a Takara release.

Did you watch the video? The throne is a Hasbro piece, and it shows. Just flimsy plastic.

Really? that's interesting. I watched it without sound.... =X

mooncake623 wrote:

Rodimus Prime wrote:

mooncake623 wrote:

AutoBorst wrote:I think Hasbro's hit an all new low point for this throne.

This release has nothing to do with Hasbro. It's a Takara release.

Did you watch the video? The throne is a Hasbro piece, and it shows. Just flimsy plastic.

Really? that's interesting. I watched it without sound.... =X

lol I dont know how to take that!! Is my voice that much of a monotone?!?! LOL

mooncake623 wrote:

Rodimus Prime wrote:

mooncake623 wrote:

AutoBorst wrote:I think Hasbro's hit an all new low point for this throne.

This release has nothing to do with Hasbro. It's a Takara release.

Did you watch the video? The throne is a Hasbro piece, and it shows. Just flimsy plastic.

Really? that's interesting. I watched it without sound.... =X

He showed the Hasbro logo on the back of the throne box. What he didn't show, and should have, is Grimlock actually sitting on the throne.

lol yeah probably. But I was so pissed off about that throne, the less I saw of it the better. Once I get the replacement figure, I'll definitely take a pic of it on the throne. I dont want to mess around too much with the defected figure since I'll need to send it back.

sorry to heat about the miss assembly in the arm. all i know is, if youve been waiting as long as i have for this figure, i would NOT want to send it back as soon as i finally got one! that sucks, but BBTS has exceptional customer service.

i wasnt actually aware of the top to bottom silver paint on him, so thats a bonus! the main reason for me wanting him was the richness of the gold chrome, and the amber blade on the sword. i should have mine late this week or the next... cant wait!

koolkollectibleskhai wrote:

mooncake623 wrote:

Rodimus Prime wrote:

mooncake623 wrote:

AutoBorst wrote:I think Hasbro's hit an all new low point for this throne.

This release has nothing to do with Hasbro. It's a Takara release.

Did you watch the video? The throne is a Hasbro piece, and it shows. Just flimsy plastic.

Really? that's interesting. I watched it without sound.... =X

lol I dont know how to take that!! Is my voice that much of a monotone?!?! LOL

Hahaha nonono. I'm at work and doing a million things at once.

Hmmm... Perhaps this is a hasbro Asia reissue much like the starscream and now the sideswipes? Cause these reissues aren't hitting any of the Japanese retailers.

mooncake623 wrote:

koolkollectibleskhai wrote:

mooncake623 wrote:

Hmmm... Perhaps this is a hasbro Asia reissue much like the starscream and now the sideswipes? Cause these reissues aren't hitting any of the Japanese retailers.

Yes, I believe this is a Hasbro Asia exclusive, and apparently only in Taiwan!?!? That's why Japanese sellers and Hong Kong sellers are not getting it. Not sure how places like BBTS, TFSource, and Toy Dojo are getting it, but I assume the have contacts/suppliers for Hasbro Asia.

Either way, I love the figure, but at this price point, I need the figure to be perfect, not defective with an assembly error in the arm/leg!

I want to start a website called

FU HASBRO!!!!!

it will detail all the bs that they have done with their figures over the years.....


that throne is a joke, i was so expecting hard plastic etc.

koolkollectibleskhai wrote:lol yeah probably. But I was so pissed off about that throne, the less I saw of it the better. Once I get the replacement figure, I'll definitely take a pic of it on the throne. I dont want to mess around too much with the defected figure since I'll need to send it back.

I hope you get a replacement without hassle. That's a very much in-demand figure, not sure how much they have in stock, and how many of the pieces are defective. Others are probably having the same problem and want a replacement. And just to be nit-picky, you could have used the MP-08 to sit in the throne to demonstrate.

About BBTS though, has anyone ever had to deal with them about a replacement? I have been assured that they are great, but they have not responded to my email with the details on the manufacturing error, and it's been about 3 days now!

koolkollectibleskhai wrote:About BBTS though, has anyone ever had to deal with them about a replacement? I have been assured that they are great, but they have not responded to my email with the details on the manufacturing error, and it's been about 3 days now!

I would email them again. They usually respond to me in 24 hours. I had a package that suppose to have delivered to me on 12/23/2013 last year but never came.... It took about a month to go through all the investigations with UPS, but I was fully refunded. Although nothing in there was for anyone else but myself but if it were presents for others..... it would've sucked everything took so long.

Instead of exchanging your whole figure maybe you can see if BBTS has an extra part of what you need? they can ship it to you and you can replace it, I'm sure that would be a lot faster.

koolkollectibleskhai wrote:About BBTS though, has anyone ever had to deal with them about a replacement? I have been assured that they are great, but they have not responded to my email with the details on the manufacturing error, and it's been about 3 days now!

ive dealt with their customer service a couple times now and found them to be quite helpful.

first was an MP tigertrack with a broken hand (they replaced the figure). the second time was a package that was brutally damaged, and had close to 80 bucks in customs on top of that (no toys actually damaged, and they gave me a $80 credit).

all they need is details, and pictures. theyre pretty forthcoming after that. and it was always 24 hours response for me, so i agree that you should email them again.

mooncake623 wrote:

koolkollectibleskhai wrote:About BBTS though, has anyone ever had to deal with them about a replacement? I have been assured that they are great, but they have not responded to my email with the details on the manufacturing error, and it's been about 3 days now!

Instead of exchanging your whole figure maybe you can see if BBTS has an extra part of what you need? they can ship it to you and you can replace it, I'm sure that would be a lot faster.

Yeah, they just emailed me and asked if it was OK if they sent me a replacement arm that I could swap out. They said they asked me this because I am in Australia, so I assume the cost of shipping a new figure etc isn't something they'd want to do if a replacement arm could be sent.

I believe that reasoning behind the black and white bio card is to differentiate this as a 2nd run release vs. the original MP 08X 1st edition.

I have a 1st edition MP 08X and the card is colored.

Destron MP1B wrote:I believe that reasoning behind the black and white bio card is to differentiate this as a 2nd run release vs. the original MP 08X 1st edition.

I have a 1st edition MP 08X and the card is colored.

Welcome to the forums!

Do you know if the first edition of MP 08X has a green tint on the clear plastic parts like the second one has?

Oh wow, that throne is bad, it's that terrible shitty thin plastic cheap plastic masks are made from!

Dead Metal wrote:Oh wow, that throne is bad, it's that terrible shitty thin plastic cheap plastic masks are made from!

I'm starting to think that that throne is just a throw in item that Hasbro Asia does like those coins! and it's the online retailers that is charging the $20 on top not realizing it's thattttt cheap..

mooncake623 wrote:

Destron MP1B wrote:I believe that reasoning behind the black and white bio card is to differentiate this as a 2nd run release vs. the original MP 08X 1st edition.

I have a 1st edition MP 08X and the card is colored.

Welcome to the forums!

Do you know if the first edition of MP 08X has a green tint on the clear plastic parts like the second one has?

Thank you!

The 1st run MP 08X has clear gray plastic vs the clear green one found in the Hasbro re release. I attached a photo of mine. Sorry for the bad lighting, the photo is from when I first got him years ago. I was so excited to have received him that I literally ran to my room and begged my wife to keep the kids away just so I could enjoy the moment, lol.

Sorry for the double post, file is too large Not sure how to make it smaller than 256k...

mooncake623 wrote:

Dead Metal wrote:Oh wow, that throne is bad, it's that terrible shitty thin plastic cheap plastic masks are made from!

I'm starting to think that that throne is just a throw in item that Hasbro Asia does like those coins! and it's the online retailers that is charging the $20 on top not realizing it's thattttt cheap..

That could actually be the case. I mean look at the last ones like this, the normal Grimlock flame sword and coin thing, that came for free with the figure, but because it was in it's own separate packaging they ended up on ebay.

Destron MP1B wrote:
The 1st run MP 08X has clear gray plastic vs the clear green one found in the Hasbro re release. I attached a photo of mine. Sorry for the bad lighting, the photo is from when I first got him years ago. I was so excited to have received him that I literally ran to my room and begged my wife to keep the kids away just so I could enjoy the moment, lol.

Much prefer this gray clear plastic from the original run. thanks again for the pictures!

Would be curious to see these side by side. My eyes can't make out a difference between the video on page two and the pictures here since the lighting is so different.